Iklangadget.com - Information about Gadget

Back in 2006, Oscar Diös heard there was a dead Boeing 747-200 built in 1976 on one of the runways at Arlanda Airport, the largest international airport in Sweden, north of Stockholm. It was once owned by a Swedish company called Transjet, who used it to fly muslim pilgrims to Mecca, as well as doing charter flights around the world until it was grounded for "organizational problems" in 2002. The noble Jumbo was in a bad state, but Oscar saw the possibilities right away. Probably after way too many glasses of akvavit that day, Diös thought he had the perfect idea: to buy the 747 and convert it into a low-cost hotel.

I was getting ready to expand my hostel business in 2006 when I heard about an old wreck of an aircraft for sale at Arlanda. Since I had for a long time wanted to establish my business at Arlanda I didn’t hesitate for a second when this opportunity struck.

galleryPost('jumbohostel', 9, '');

It may seem like a weird thought, but being a modest owner of the hostel Uppsala Vandrarhem och Hotell, in Uppsala, Oscar knew how expensive it is to actually find a terrain near a busy airport like Arlanda, and then actually build an entire hotel from scratch.

That's why, when he learnt about the dead Jumbo, Oscar only saw cheap space for rooms and decided it was time to continue his inexpensive hotel business right there. He thought that, being the busiest, largest international airport in his country, there was going to be a lot of clients looking for cheap accommodation.

However, at the end it wasn't that easy. There was a long way from buying the airplane to finally setting up the hostel. First he needed to get the OK from the authorities of Sigtuna, the town that controls the terrains in which the Arlanda Airport is based. He had the perfect pitch for them: it was going to be a unique landmark, he thought. He wanted to place it right at the entrance of the airport itself, on top of a concrete foundation with the landing gear tied to two steel cradles. The authorities heard the story and, surprisingly enough, they agreed to approve the plan and granted him the necessary permissions.

The hotel itself was also a challenge. It wasn't going to be as easy as to install a few beds, provide clean linens, and sell curry kyckling macka, small beer cans, lousy pot coffee, and peanut bags at the airplane's second level cafeteria. The Boeing 747-200 interior—with 450 seats—needed to be completely dismantled and sanitized. Then, it needed to be insulated, divided into 25 rooms (each of them 6 square meters, with 3 meters high ceilings), and completely rewired. It also needed new plumbing, bathrooms, sanitation, and a new climate control system, since the windows on planes are fixed and can't be opened. And to finish it all, the whole result had to adhere to the strict construction policies of Sweden.

At the end, and after a two year odyssey, he did it: the Jumbo Hostel—as Oscar called his creation—has been towed to its final destination this summer, and bookings will start in December. All in the name of inexpensive accommodation, pilots and stewardesses sex fantasies, and crazy Swedish landmarks. Pass the akvavit Oscar, next time I go to that part of the world, I'll be checking in. [Jumbo Hostel via Random Good Stuff]

newVideoPlayer("/marufightingbots_giz.flv", 475, 376,""); Naoki Maru may live in Hikone, north of Kyoto, down the road from a samurai castle full of katana swords and armor, but for him, the ancient Japanese art of bushido is best carried out with robots, not people. King Kizer, the Maru family robot, has dominated the Robo-One tourney over the past three years, collecting $50,000 in prize money. Maru, a factory engineer by day, is trying to perfect a way to make Kizer even more of an ass kicker using a technique he had seen many times in anime: A harness that captures human movements and translates them into robotic attacks and other gestures.

Check out video footage of the harness in action below, plus our exclusive interview, where Maru discusses the what it takes to win a robotic deathmatch. galleryPost('marubots', 3, '');

Maru builds the bots; his sons Kenta and Ryoma operate them in the combat tournaments. For a prizefighter, King Kizer is only 16 inches tall but has a lightweight aluminum frame, very rapid servomotors and sensors that help it maintain its balance and detect its enemies. Kizer uses the latter to launch speedy, autonomous attacks on foes.

The harness creates a master-slave connection with Kenta. When the boy moves his upper body during combat, sensors with voltage potentiometers transmit the motions via a Bluetooth link to Kizer, which reproduces them. In the video, you can see that there's a bit of a delay, but apparently robot combat is still clumsy enough for this to not have too great an impact. The lower body is still controlled with a gamepad.

newVideoPlayer("/marumasterslave_giz.flv", 475, 376,"");

We recently visited the Maru dojo to discuss King Kizer and new fighting-robot technologies:

How does the "master-slave" control technology work? Where did you get the idea? Have you used it in Robo-One tournaments?
The master-slave control idea goes a long way back. The concept has a long history in robot anime, and it has been implemented in surgical devices. I've been using it since I first entered Robo-One.

The equipment affixed to the operator's body is known as a "master suit," and I concentrated on making this lightweight.

The strong point of the system is that it's great for adapting to the requirements of the moment. Other systems can only be operated through preprogrammed robot motions. For instance, in hand-to-hand combat, if you encounter a robot that is shorter than what you expected to go up against, your machine will be punching air instead of metal. But with a master-slave control system, that's not a problem you encounter.

The weak point of my current master-slave system is that it's limited to the upper half of the controller's body. But this is a problem that I believe I can solve. I'm also making improvements to use the system in non-combat applications. As you saw, it can also be used to handle eggs!

How do you build your robots?
When I decided to make my first bipedal robot from scratch, I had to study. The manufacturing process includes making the aluminum panels—cutting, bending and finishing—, plus vacuum form molding, resin casting and other techniques. The design is done in 2D CAD, and then I make a model, printing the frame on paper. Once I confirm the mechanical structure of the paper model, I start creating the actual aluminum panels. Since I don't do it in 3D CAD [just 2D CAD], this work process is really critical.

I already had computer programming skills, so making the robot's control system wasn't so difficult for me.

What is the role of your sons in your robot activity?
They're more than operators—our team is like the driver and mechanics in an F1 race car team. But their most important role is that they keep me motivated. I give it my all so that my sons can be victorious. I doubt I would have the power to keep winning at Robo-One if I had to create and operate the robots and compete in the tournaments all by myself!

Also, my sons sometimes provide me with unexpected inspiration. As children, their perspectives on robot making are invaluable.

In only three years of robot fighting, you have collected about $50,000 in prize money at Robo-One. Why is the Maru family team so successful?
I could not do this if I were not part of a family team. Most competitors in Robo-One are bachelors—there are few family teams. And I don't want to see my kids cry if they lose at the tournament!

Another reason for our success is not the technological power of our hardware and software, but how we manage our team. There isn't a great difference between competitors. in Robo-One. Fighting really hinges not on the actual winning or losing, but on seemingly trivial factors that are not obvious.

To give you some specific examples, one must consider things like safety parameters that are in your robot's design and how they'll affect performance, readiness for bugs that crop up during a fight, as well as strategies and practice based on your study of opponents. You can't count on having a winning streak if all you have done is create a robot with some cool abilities.

What is special about Japanese robots in general?
For Japanese people, a robot means a humanoid, bipedal robot. It seems Japanese are unique in the world in this way of thinking about robots. Many of the competitors in Robo-One watched robot anime when they were kids and that really influenced them. Robots are part of their childhood dreams, and that is reflected in their robot designs and fighting techniques.

Music for the second clip: "Prelude No. 1" by The Grift; no frikkin' clue what the song in the first clip is.

Filed under: Gaming

You know how it goes with Sony and PS3-related peripherals. A big introduction, followed by a slight delay, followed by a longer delay, followed by a little something to take the sting off. Here we have word from Noam Rimon, senior development manager at SCEA R&D, that the news-blasting (and uncomfortably named) Life with PlayStation will once again be delayed. According to Noam, Sony is "still pushing some paperwork" on the service, though he gave no expected time frame for the actual launch. Nevertheless, he softened the blow by announcing once and for all that it will indeed be free (and accessible directly from the XMB) whenever it finally goes live. Gotta take the good with the bad, we guess.

Read | Permalink | Email this | Comments

Believe it or not, this beautiful Gorenje fridge is an official Apple-licensed Made for iPod refrigerator. And believe it or not, it's not just a speaker and a dock glued to a glossy black fridge: You can actually control the fridge itself using your iPod touch or iPhone using an application called iGorenje. The coolness doesn't stop there, because iGorenje can control all kinds of Gorenje appliances—from the washing machine to the oven—as you can see in the user interface gallery.

galleryPost('igorenje', 12, '');

The application is not built for iPhone/iPod touch, however, but it is served from a home server that controls the appliances directly. This allows not only to use the iPod touch, but also any other web device in your home Wi-Fi network. The program allows you to program the devices using a very easy to use graphical user interface.

For example, you can set your oven to cook a type of cake by just visually selecting a recipe and clicking start. In fact, you can even get recipes straight from the server itself. The only bad thing: the iPod dock thingie is taking the place of the built-in draught beer system, which in my book is quite -20 points. [More IFA 2008 Coverage]

Once upon a time I wanted to be a fighter pilot, which is probably why I write so much about the biggest and baddest machines ever. My feeling then and now is that there's nothing that can match the thrill of flying one of the fastest, most expensive gadgets in the world almost at ground level through a desert canyon. Exactly like this french Mirage pilot does in this awesome video, which has Johnny Cash singing I've Been Everywhere (always good).

Once upon a time I wanted to be a fighter pilot, which is probably why I write so much about the biggest and baddest machines ever. My feeling then and now is that there's nothing that can match the thrill of flying one of the fastest, most expensive gadgets in the world almost at ground level through a desert canyon. Exactly like this french Mirage pilot does in this awesome video, which has Johnny Cash singing I've Been Everywhere as a extra.

Filed under: Desktops

CTL, the same cats who brought us the 2go PC laptop, are apparently working up an equally cheap and not-exactly-flashy nettop PC. The 2go PC Nettop will reportedly range in price from $149 to $299 depending on specifications, and the baseline model will feature Intel's DG945GCLF motherboard, Intel's Atom 230 processor, 1GB of Kingston DDR2 RAM, a GMA 950 graphics accelerator, support for one HDD and one optical drive, six USB 2.0 ports and an Ethernet jack. The Essential Plus Edition ($199) adds in Ubuntu and an 80GB 7,200RPM hard drive (while slashing RAM to 512MB); the $299 Essential Performance Edition comes with Windows XP Home, a 160GB hard drive and 1GB of memory. There's no word just yet on when the 4.5-pound boxes will be released, but we'd expect 'em to surface pretty quietly.

[Thanks, Nate]

Permalink | Email this | Comments

Filed under: Cellphones, Gaming, Peripherals

For better or worse, it looks like the so-called iControlPad is edging closer to reality -- or at least something really similar. According to a new image (and our limited Spanish translation skills), Belkin is actually looking to produce an App Store gaming controller, though we're still not entirely convinced that what we're seeing is legitimate. Whatever the case, the JoyPod would somehow, someway provide users who purchased Super Monkey Ball to play it using a bona fide game pad, though we can't figure out if the iPod touch / iPhone slips in behind the controller or if it just morphs to fit the JoyPod's space constraints. Guess we'll see (or not) soon enough.

[Thanks to everyone who sent this in]

Read | Permalink | Email this | Comments

newVideoPlayer("/lgnetbook_gizmodo.flv", 520, 410,""); I groped and used the LG X110 netbook for some time here at IFA. As Mark pointed out, this is the first netbook where "net" actually means something else: direct 3G network access without additions.

The Good: The LG X110 felt solid and compact in my hands, heavier than I expected for such size. Good hard plastic finish outside. Fast operation under Windows and fast rendering and access to the Web, although unfortunately I was only able to try it with the Wi-Fi connection. Good set of ports, although I wish all these computers implemented HDMI video output, rather than VGA.

The Bad: I was disappointed the interior wasn't real aluminum but painted plastic. They keyboard didn't feel good to me, too bland and not enough clickety-clack action, but that's just my personal taste.

Bottom line: For those looking for a good Windows- or Linux-based netbook with no-fuss internet access at all times, my first impression is that they will be happy with this one.

Filed under: Cellphones

From the looks of it, Sprint has gone and gotten a decent chunk of its playbook leaked all over the interblogs, and it's chock-full of titillating information. Thanks to slippery fingers and loose lips, we already knew that the Touch Diamond and Touch Pro were headed to the carrier, but now we have some solid dates (mid-September for the Diamond, October 19th for the Pro), and pricing ($549.99 and $579.99, respectively). Of course, this is all according to the above document, which admittedly could be the work of an extremely bored Photoshopper -- but this jibes pretty tightly with a lot of other chatter we've been hearing.

[Thanks to everyone who sent this in]

Read | Permalink | Email this | Comments